ТК-80 transformer

order

description
technical parameters

Transformer ТК-80 is designed as power supply for contact welding machines (spot, seam, butt and projection welding); it may also be used for continuous current (no more than 9/7,8 кА) machines (for example, МТ-1615, МТ-1616, МТ-1928, МТ-1930, МТ-1933, МТ-2103-1, МТP-01, МТP-1110, МSО-401, МТМ-160, МТМ-166, АТМS-14).

Characteristic features of transformer ТК-80

Liquid cooling
Insulation class «F» (maximum temperature – no more than 155 ˚С)
Core pieces providing for minimum electromagnetic energy waste are produced according to Unicore technology
Winding unit is filled with epoxy compound
Climatic category - UKHL4

*Please pay attention that the technical specification and the appearance of the equipment placed on this web-site are only for informational purpose and are not a public offer. The producer reserves the right to make any changes.

**Copying the data without permission of the web-site administration is prohibited.

Mains voltage at 50Hz frequency	380 V
Ratedprimaryvoltage	365 V
Secondary no-load voltage: at joining-up in parallel at joining-up in series	2,9…6,3 V 5,8…12,6 V
Numberofcontrolsteps	8
Number of independent secondary coils	2
Continuous secondary current: at joining-up in parallel at joining-up in series	9,0 кА 4,5 кА
Power at 50% duty cycle at maximum control step	80 кVА
Insulation class	F
Cooling	water
Overall dimensions (LxWxH), not more than	600х435х185 mm 600х328х185 mm (minitower)
Weight, not more than	112 kg

Декларация о соответствии ТК-80, ТК-80.04