Technosvar Technology Center
YouTube

Useful and interesting videos on our channel!

Technical information, reviews of manufactured equipment!

Go to YouTube
Technosvar Technology Center
  • En
Более 10 лет с вами
Call me back
Close
Call me back

Fill out the form and we will call you back!

Work time
from 08:00 to 18:00 Astana

I agree with the rules of the site and to the processing of my personal data in accordance with the requirements Federal Law of May 21, 2013 No. 94-V "On Data Protection and Protection"

MR-601 PROJECTION RESISTANCE WELDING MACHINE

Desk-type resistance projection microwelding machine МR-601 is designed for welding of diode package units (bottle and bottle cover) with 100% diameter wide conjunction (diameter – 3,5 mm, zone thickness at welding point – 0,5 mm). Welding material – alloy 29 NК (kovar) covered with nickel (5 to 8 mym) and gold (8 to 10 mym).

Advantages of МR-601 machine:

  • It is produced of Russian raw materials that have all the necessary certificates
  • Welding current regulation at voltage change
  • Airproof welding of diode package
  • Strain gage transducer (used for pressing force testing)

Additional options:

  • Standalone compressor plant 

 

 

 

         *Please pay attention that the technical specification and the appearance of the equipment placed on this web-site are only for informational purpose and are not a public offer. The producer reserves the right to make any changes.

         **Copying the data without permission of the web-site administration is prohibited.

Mains voltage at 50Hz frequency 220 V
The highest secondary current 6 кА
Rated continuous secondary current 1,8 кА
Maximum power in case of short circuit 11,4 кVА
Power at 50% duty cycle 5 кVА
Compression force of electrodes:
- the largest at compressed air pressure of 0.5 MPa
- the smallest at compressed air pressure of 0.1 MPa

50 dаN
15 dаN
Nominal stick-out 105 mm
Nominal spacing 120 mm
Upper electrode stroke:
- full (working + additional)
- working

15 mm
from 5 to 15 mm
Limits of idle voltage adjustment Up to 1,9 V
Welding power adjustment: - phase 0 — 100 %
Electrode compression drive air-powered straight drive
Cooling of current-carrying parts Natural air cooling
Overall dimensions of the machine (L×W×H), no more than 750х1000х1350 mm
Weight, not more than 100 kg
Need help?
Close
You need help selecting equipment?

Just fill out the form and we will find what You are looking for!

I agree with the rules of the site and to the processing of my personal data in accordance with the requirements Federal Law of May 21, 2013 No. 94-V "On Data Protection and Protection"

Close
Service request
I agree with the rules of the site and to the processing of my personal data in accordance with the requirements Federal Law of May 21, 2013 No. 94-V "On Data Protection and Protection"

Наверх